by homerjon_mistaway | Dec 31, 1969 | Gen 3 – Setup
To download and print the manual, click Gen 3: Operating Manual -1. Pick a Suitable Location On firm level surface with good access for service. Free from flooding or sprinklers. Close to water faucet dedicated to the unit. 25 ft of 3/8″ tubing included with...
by homerjon_mistaway | Dec 31, 1969 | Controller & Remote, Gen 1.3 – Setup, Gen 3 – Setup
The “iMist2-ready” handheld transmitter with the light colored label will communicate with the white “iMist2-ready” receiver but not with the first generation (black) receiver. 1. Put the iMist2-ready receiver on the misting unit into...
by homerjon_mistaway | Dec 31, 1969 | Gen 3 - Routine Service, Gen 3 – Setup, Insecticide
* Please Note: Using any non-MistAway approved concentrate with a Gen 3 Tankless System will void the manufacturer’s warranty. Click on links for labels, MSDS and misting-specific language. Conventional Formulations in Gen 3 systems – with Label...
by homerjon_mistaway | Dec 31, 1969 | Gen 3 – Setup
Leak Detection enables the Gen 3 to detect a leak in the nozzle circuit. To function properly, the leak TOLerance should be calibrated to reflect the number of nozzles on the nozzle circuit. To configure Leak Detection TOLerance for Nozzle Count DATA Menu, TOL. Press...
by homerjon_mistaway | Dec 31, 1969 | Gen 1.3 – Setup, Gen 3 – Setup, Nozzle Circuit
WARNING! AIR TRAPPED IN THE FILTER DUE TO IMPROPER INSTALLATION AND SYSTEM STARTUP COULD CAUSE VIOLENT RUPTURE OF THE FILTER HOUSING RESULTING IN SEVERE PERSONAL INJURY! FOLLOW INSTRUCTIONS CAREFULLY. Do not remove Pressure Relief Valve Assembly Before...
