No products in the cart
Gen 1.3: Access Components by Repositioning Cover
Gen 1.3 component repairs or replacements can be made by repositioning the controller and plastic cover that protects the unit.
Time: 3 minutes
Tools: Phillips screwdriver
1. For access, reposition controller and cover.
A. Remove screws securing controller to cover.
B. Leaving the wiring harness connected, feed the controller through the well in the cover and let it rest on the metal chassis inside.
C. Remove 4 screws securing cover to metal chassis with a Phillips screwdriver.
D. Lift the cover off the chassis and allow it to hang behind the unit from the 1/4" tubing that connects to the pressure gauge.
2. After the repair or replacement is made and tested, reverse the process.
A. Rotate cover back onto chassis and use Phillips screwdriver to replace 4 screws that secure the cover to the chassis.
B. Feed controller back into position in the cover and secure with screws.